Sharp CD-E600H Kullanım Kılavuzu - Sayfa 19
Stereo sistemi Sharp CD-E600H için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Sharp CD-E600H 41 sayfaları. Mini component system
To interrupt playback:
Press the CD
button on the remote control.
To resume playback from the same point, press the
To stop playback:
Press the
button.
To remove the CDs:
Whilst in the stop mode, press the OPEN/CLOSE
The disc tray will open. Remove the two discs. Then, press the
DISC SKIP button to rotate the disc tray and remove the remaining
disc.
Caution:
! Do not place two CDs in one disc tray.
! Do not play discs with special shapes (heart- or octagon-
shaped). It may cause malfunctions.
! Do not push the disc tray whilst it is moving.
! Do not turn the disc tray by hand. This may cause malfunctions.
! If the power fails whilst the tray is open, wait until the power is
restored.
! If the disc tray is stopped with force, "ER-CD10" will appear on
the display for 3 seconds and the unit will not function. If this
occurs, press the ON/STAND-BY button to enter the power
stand-by mode and then turn the power on again.
! If TV or radio interference occurs during CD operation, move the
unit away from the TV or radio.
! If a disc is damaged, dirty, or loaded upside down, the disc will
skip or not play back.
" To locate the beginning of a track
To move to the beginning of the next track:
button.
Press the
button for less than 0.5 seconds during playback.
To restart the track being played:
Press the
button for less than 0.5 seconds during playback.
Notes:
button.
! You can locate the beginning of a track on a single disc only.
! You can skip to any track by pressing the
repeatedly until the desired track number appears.
" To locate the desired portion
For audible fast forward:
Press and hold down the
For audible fast reverse:
Press and hold down the
Notes:
! Normal playback will resume when the
released.
! You can locate the desired portion on a single disc only.
! When the end of the last track is reached during fast forward,
"END" will appear on the display and CD operation will be
paused. When the beginning of the first track is reached during
fast reverse, the unit will enter the playback mode.
02/12/24
or
button
button during playback.
button during playback.
or
button is
CD-E600H(H)E2.fm
CD-E600H
ENGLISH
8
E-12