Sharp CD-E600H Kullanım Kılavuzu - Sayfa 24
Stereo sistemi Sharp CD-E600H için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Sharp CD-E600H 41 sayfaları. Mini component system
Sayfayı YazdırListening to a cassette tape (TAPE 1 or TAPE 2)
CD-E600H
ENGLISH
Before playback:
" For playback, use normal or low-noise tapes for
the best sound. (Metal or CrO tapes are not rec-
ommended.)
" Do not use C-120 tapes or poor-quality tapes, as
they may cause malfunctions.
" Before loading a tape into the cassette compartment,
tighten the slack with a pen or a pencil.
Playback is possible in the TAPE 1 compartment as well as the
TAPE 2 compartment.
1
Press the ON/STAND-BY button to turn the power on.
2
Open the cassette door by pushing the area marked "PUSH
EJECT ".
E-17
3
Load a cassette into the TAPE 1
compartment or TAPE 2 compart-
ment with the side to be played
facing toward you.
4
Press the TAPE (1
2) button to select the cassette you
want to listen to.
5
Press the
/
button to start playback.
To stop playback:
Press the
button.
Fast forward/rewind: (TAPE 2 only)
1 Press the
button, then press the TAPE (1
TAPE 2.
2 To advance the tape, press the
button. To rewind it, press the
button.
Caution:
" To remove the cassette, press the
compartment.
" Before changing from one tape operation to another, press the
button.
" If a power failure occurs during tape operation, the tape head will
remain engaged with the tape and the cassette door will not
open. In this case, wait until the power is restored.
02/12/24
CD-E600H(H)E2.fm
TAPE 1
TAPE 2
2) button to select
button, and then open the