Sharp CD-MPX110E Kullanım Kılavuzu - Sayfa 33
Stereo sistemi Sharp CD-MPX110E için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Sharp CD-MPX110E 37 sayfaları.
![Sharp CD-MPX110E Kullanım Kılavuzu](/uploads/products/server2/5046204/5046204.png)
n Tuner
Symptom
Possible cause
l The radio makes
l Is the unit placed near the TV or com-
unusual noises
puter?
continuously.
l Is the FM aerial or AM loop aerial placed
properly? Move the aerial away from the
AC power lead if it's located nearby.
n Condensation
Sudden temperature changes, storage or operation in an extremely
humid environment may cause condensation inside the cabinet (CD
pickup, tape heads, etc.) or on the transmitter on the remote control.
Condensation can cause the unit to malfunction. If this happens,
leave the power on with no disc (or cassette) in the unit until normal
playback is possible (about 1 hour). Wipe off any condensation on
the transmitter with a soft cloth before operating the unit.
n Before transporting the unit
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CD button.
3 Press the OPEN/CLOSE
button to open the disc tray.
Remove all disc inserted in the unit.
4 Press the OPEN/CLOSE
button to close the disc tray.
Make sure that "NO DISC" is displayed.
5 Press the ON/STAND-BY button to enter the stand-by mode,
and then unplug the AC power lead from the wall socket.
n If trouble occurs
When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.
If such a problem occurs, do the following:
1 Set the unit to the stand-by mode and turn the power on again.
2 If the unit is not restored in the previous operation, unplug and
plug in the unit, and then turn the power on.
Note:
If neither operation above restores the unit, clear all the memory by
resetting it.
n Clearing all the memory (reset)
1 Press the ON/STAND-BY button to enter the power stand-by
mode.
2 Whilst pressing down the
PRESET
BASS/DEMO button, press the REC PAUSE button until "CLEAR
AL" appears.
Caution:
This operation will erase all data stored in memory including clock,
timer settings, tuner preset, and CD programme.
n Care of compact discs
Compact discs are fairly resistant to damage, however mistracking
can occur due to an accumulation of dirt on the disc surface. Follow
the guidelines below for maximum enjoyment from your CD collec-
tion and player.
l Do not write on either side of the disc, particularly the non-label
side from which signals are read. Do not mark this surface.
l Keep your discs away from direct sunlight, heat, and excessive
moisture.
l Always hold the CDs by the edges. Fingerprints, dirt, or water on
the CDs can cause noise or mistracking. If a CD is dirty or does
not play properly, clean it with a soft, dry cloth, wiping straight out
from the centre, along the radius.
NO
10/3/05
MPX100EE_1.fm
CD-MPX100E
button and the X-
YES
Correct
33
TINSEA093AWZZ