Sharp CD-MPX850 Kullanım Kılavuzu - Sayfa 12

Stereo sistemi Sharp CD-MPX850 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Sharp CD-MPX850 44 sayfaları. Sharp stereo system user manual

Sayfayı Yazdır

System connections (continued)

CD-MPX850

AC power connection

After checking all the connections have been made correctly, plug

the AC power cord of this unit into the AC outlet. If you plug in the unit

first, the unit will enter the demonstration mode.

AC INPUT

Notes:

The unit will start the tape initialization when plugged in to the AC

outlet. During this process, initializing sound will be heard and the

unit cannot be turned on. Wait until the process is finished.

Unplug the AC power cord from the AC outlet if the unit will not be

in use for a prolonged period of time.

Cooling fan:

The main unit is built with a cooling fan at the rear of the unit for

improved cooling. Please do not cover the opening of the fan with

any obstacles, as this will block proper ventilation.

AC outlet

(AC 120 V, 60 Hz)

AC INPUT

Demonstration mode

The first time the unit is plugged in, the

unit will enter the demonstration mode.

You will see words scroll and the speaker

will light up in flashing mode.

To cancel the demonstration mode:

When the unit is in the power

stand-by mode (demonstration

mode), press the X-BASS/DEMO

button. The unit will enter the low

power consumption mode and the

speaker light up will be off.

To return to the demonstration mode:

When the unit is in the power stand-by mode, press the

X-BASS/DEMO button again.

Note:

When the power is on, the X-BASS/DEMO button can be used to

select the extra bass mode.

Outdoor FM antenna

Use an outdoor FM antenna if you require better reception. Consult

your dealer.

75 ohms

coaxial cable

Note:

When an outdoor FM antenna is used, disconnect the supplied FM

antenna wire.

Outdoor

FM antenna