Sharp CD-SW300H Kullanım Kılavuzu - Sayfa 16

Stereo sistemi Sharp CD-SW300H için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Sharp CD-SW300H 48 sayfaları. Mini component system
Ayrıca Sharp CD-SW300H için: Kullanım Kılavuzu (48 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar)

Sharp CD-SW300H Kullanım Kılavuzu
Listening to a CD or MP3/ WMA disc (continued)
CD-SW300H
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD button.
3
Press the
1 button and within 5 seconds, press the
OPEN/CLOSE button to open the disc tray 1.
4
Place the disc on the disc tray 1, label side up.
Be sure to place 8 cm (3") disc in the middle of the disc trays.
5
Press the OPEN/CLOSE button to close the disc tray 1.
[CD]
Total number of
Total playing
Total number of
Total playing
tracks on the disc
time of the disc
tracks on the disc
time of the disc
Due to the structure of the disc information, it takes longer to
read an MP3/WMA disc than a normal CD (approximately 20
to 90 seconds).
6
You can place discs on the trays 2 - 5 by following steps
3 - 5.
7
Press the
/
button to start playback.
16
Playback will begin from track 1 on disc 1. After that disc finishes
playing, the next disc will automatically play.
After the last track on the fifth disc is played, the unit will stop au-
tomatically.
When there is no disc in one of the disc trays (1 - 5), the empty
tray will be skipped to the next tray with a disc.
To exchange other discs whilst playing a disc:
Press one of the
seconds, press the OPEN/CLOSE button and exchange discs.
12 cm (5")
8 cm (3")
To remove the discs:
In the stop mode, press the
press the OPEN/CLOSE button.
Caution:
Do not place two discs in one disc tray.
MP3 indicator
Do not play discs of special shapes (heart, octagon, etc.) as it
MP3 indicator
WMA indicator
may cause malfunctions.
WMA indicator
[MP3/WMA]
Do not push the disc tray whilst it is moving.
If the power fails whilst the tray is open, wait until the power is re-
stored.
If the disc tray is stopped with force, "ER-CD20" will appear on the
Total number
Total num-
display for 3 seconds and the unit will not function. If this occurs,
Total number
Total number
of folders
ber of files
of folders
of files
press the ON/STAND-BY button to enter the power stand-by
mode and then turn the power on again.
If TV or radio interference occurs during CD operation, move the
unit away from the TV or radio.
If a disc is damaged, dirty, or loaded upside down, the disc will
skip or not play.
Disc play indicator
14/2/06
1 -
5 buttons for the stopped disc and within 5
1 -
5 button and within 5 seconds,
CD-SW300HA_EN.fm
TINSZA165AWZZ