Sharp XL-S10 Kullanım Kılavuzu - Sayfa 9
Stereo sistemi Sharp XL-S10 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Sharp XL-S10 31 sayfaları. Sharp deck operation manual xl-s10
Ayrıca Sharp XL-S10 için: Servis Kılavuzu (44 sayfalar)
Sayfayı Yazdır
System connections
FM
antenna
Right speaker
AC outlet
(AC 120 V, 60 Hz)
Right speaker
AM loop
antenna
Left speaker
Left speaker
White line
Black
Make sure to unplug the AC power cord before any connec-
tions.
! Antenna connection
Connect the FM/AM loop antenna to the ANTENNA jack.
Position the FM antenna wire and rotate the AM loop antenna for
optimum reception. Place the AM loop antenna on a shelf, or attach
it to a stand or a wall.
Notes:
" Placing the antenna on the unit or near the AC power cord may
cause noise pickup. Place the antenna away from the unit for bet-
ter reception.
" Do not connect the attached FM antenna to an external FM
antenna. Otherwise, trouble may occur.
Installing the AM loop antenna:
< Assembling >
! Speaker connection
Connect the wire with the white line to the minus (-) terminal and the
black wire to the plus (+) terminal.
Caution:
" Do not let the bare speaker wires touch
each other.
" Use speakers with an impedance of 4 ohms or
more, as lower impedance speakers can dam-
age the unit.
" Do not mistake the right and the left channels.
The right speaker is the one on the right side
when you face the unit.
< Attaching to the wall >
Wall Screws (not supplied)
Incorrect
XL-S10
9