Sharp XL-UH242 Kullanım Kılavuzu - Sayfa 27
Stereo sistemi Sharp XL-UH242 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Sharp XL-UH242 40 sayfaları. Sharp operation manual micro component system xl-uh242
Ayrıca Sharp XL-UH242 için: Servis Kılavuzu (4 sayfalar), Servis Kılavuzu (4 sayfalar)
Sayfayı Yazdır
Listening to the radio
POWER
ON/STANDBY
TUNER
(BAND)
Auto power on function:
When you press any of the following buttons, the unit turns on.
TUNER (BAND) button (main unit and remote control): The unit
turns on and the "TUNER" function is activated.
/
button on the main unit: The unit turns on and playback of
the last function starts (CD,TUNER,VIDEO/AUX/USB).
Tuning
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TUNER (BAND) button repeatedly to select the
desired frequency band (FM or AM).
3
Press the TUNING (
or
tune in to the desired station.
Manual tuning:
Press the TUNING (
or
to tune in to the desired station.
Auto tuning:
When the TUNING (
or
seconds, scanning will start automatically and the tuner will
stop at the first receivable broadcast station.
Notes:
When radio interference occurs, auto scan tuning may stop auto-
matically at that point.
Auto scan tuning will skip weak signal stations.
To stop the auto tuning, press the TUNING (
again.
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the "ST" indicator.
" " will appear when an FM broadcast is in stereo.
If the FM reception is weak, press the TUNER (BAND) button to
extinguish the "ST" indicator. The reception changes to monau-
ral, and the sound becomes clearer.
FM stereo mode indicator
) button on the remote control to
) button as many times as required
) button is pressed for more than 0.5
or
) button
FM stereo receiving indicator
XL-UH242
27