Sharp XL-UR250H(BK) Kullanım Kılavuzu - Sayfa 28
Stereo sistemi Sharp XL-UR250H(BK) için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Sharp XL-UR250H(BK) 44 sayfaları. Micro component system
Ayrıca Sharp XL-UR250H(BK) için: Hızlı Başlangıç Kılavuzu (2 sayfalar)
Sayfayı Yazdır
XL-UR250H(BK)
Listening to the radio
XL-UR2110H(BK)
Auto power on function:
When you press any of the following buttons, the unit turns on.
TUNER (BAND) button (main unit and remote control): The unit
turns on and the "TUNER" function is activated.
/
button on the main unit: The unit turns on and playback of
the last function starts (CD,TUNER,VIDEO/AUX/USB).
28
Tuning
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TUNER (BAND) button repeatedly to select the
desired frequency band (FM or AM).
3
Press the TUNING (
or
tune in to the desired station.
Manual tuning:
Press the TUNING (
or
the desired station.
Auto tuning:
When the TUNING (
or
seconds, scanning will start automatically and the tuner will
stop at the first receivable broadcast station.
Notes:
When radio interference occurs, auto scan tuning may stop
automatically at that point.
Auto scan tuning will skip weak signal stations.
To stop the auto tuning, press the TUNING (
When an RDS (Radio Data System) station is tuned in, the fre-
quency will be displayed first, and then the RDS indicator will light
up. Finally, the station name will appear.
Full auto tuning can be achieved for RDS stations "ASPM", see
page 31.
To receive an FM stereo transmission:
Press the TUNER (BAND) button to select stereo mode and "ST"
indicator will be displayed.
" " will appear when an FM broadcast is in stereo.
If the FM reception is weak, press the TUNER (BAND) button to
extinguish the "ST" indicator. The reception changes to monaural,
and the sound becomes clearer.
FM stereo mode indicator
) button on the remote control to
) button repeatedly to the tune in to
) button is pressed for more than 0.5
or
) button again.
FM stereo receiving indicator