Sharp Advanced MXM565N Hızlı Başlangıç Kılavuzu - Sayfa 13

Hepsi Bir Arada Yazıcı Sharp Advanced MXM565N için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Sharp Advanced MXM565N 28 sayfaları. Digital multifunctional system
Ayrıca Sharp Advanced MXM565N için: Teknik Özellikler (8 sayfalar), Hızlı Kılavuz (8 sayfalar), Teknik Özellikler (8 sayfalar), Hızlı Başlangıç Kılavuzu (28 sayfalar)

Sharp Advanced MXM565N Hızlı Başlangıç Kılavuzu

TURNING THE POWER ON AND OFF

This machine has a main power switch, found at the bottom left after the front cover is opened, and a power button (
Turning on the power
• Switch the main power switch to the " " position.
• After the main power indicator lights in green, press the power button (
Turning off the power
(1) P ress the power button (
) to turn off the power.
(2) S witch the main power switch to the " " position.
Restarting the machine
In order for some settings to take effect, the machine must be restarted. If a message in the
touch panel prompts you to restart the machine, press the power button (
power and then press the key again to turn the power back on.
CAUTION
• When turning off the power, make sure that the indicators on the operation panel turn
off as well.
• If the machine suddenly turns off, such as in the event of a power failure, turn the
machine on again, and then turn off the machine following the correct procedure for
turning off the machine.
Switching off the main power switch or removing the power cord from the outlet while
any of the indicators are lit or blinking may damage the hard drive and cause data to
be lost.
• Switch off both the power button (
power cord if you suspect a machine failure, if there is a bad thunderstorm nearby, or
when you are moving the machine.
).
) to turn off the
) and the main power switch and unplug the
), located on the operation panel.
[POWER] button
Main power switch
• When using the fax or Internet fax function, always keep the main power switch in
the " " position.
• In some states of the machine, pressing the power button (
make the settings take effect. In this case, use the main power switch to switch
the power off and then on.
13
Main power indicator
) to restart will not