Sharp AL-1540CS Çevrimiçi Kılavuz - Sayfa 28

Hepsi Bir Arada Yazıcı Sharp AL-1540CS için çevrimiçi göz atın veya pdf Çevrimiçi Kılavuz indirin. Sharp AL-1540CS 37 sayfaları. Sharp al-1530cs: user guide
Ayrıca Sharp AL-1540CS için: Servis Kılavuzu (6 sayfalar)

Sayfayı Yazdır

Plug and Play Screen does not Appear (when the USB is connected)

If the Plug and Play screen does not appear after you connect the unit to your computer with a USB cable and turn on

the power of both devices, follow the steps below to verify that the USB port is available.

Click the "start" button, click "Control Panel", and

then click "Performance and Maintenance".

On Windows 98/Me/2000, click the "Start" button, select

"Settings", and then click "Control Panel".

Click "System", click the "Hardware" tab, and click

the "Device Manager" button.

"Universal Serial Bus controllers" will appear in the list

of devices.

! If the "System" icon does not appear on

Windows Me, click "view all Control Panel

options" to view it.

Note

! On Windows 98/Me, double-click the "System" icon

and click the "Device Manager" tab.

! On Windows 2000, double-click the "System"

icon, click the "Hardware" tab, and click the

"Device Manager" button.

Click the ( ) icon beside the "Universal Serial Bus

controllers".

Two items will display, your Controller chipset type and

Root Hub. If these items appear, you can use the USB

port. If the "Universal Serial Bus controllers" shows a

yellow exclamation point or does not appear, you must

check your computer manual for USB troubleshooting

or contact your computer manufacturer.

When you make sure that the USB port is enabled,

install the software, referring to "INSTALLING THE

SOFTWARE" in the Operation Manual.

CONTENTS

INDEX