Sharp AL-841 Kullanım Kılavuzu - Sayfa 6
Hepsi Bir Arada Yazıcı Sharp AL-841 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Sharp AL-841 32 sayfaları. Digital laser multifunction
Sayfayı Yazdır
CONNECTING THE INTERFACE CABLE
To use the AL-841 as a laser printer or scanner, connect it to your computer using a parallel
interface cable.
Use the parallel interface cable included with the AL-841.
1
For specifications of the parallel interface, see page 26.
Check that the power switches of both the machine and the computer are in the OFF
1
position.
Plug the parallel interface cable into the printer interface connector. Fasten the two bail
2
clips at the side of the printer connector to hold the interface connector in place.
Plug the other end of the cable into the parallel interface connector on your computer.
3
(Refer to your computer manual for details.)
This machine sends and receives data bi-directionally and at high speed. Some
switch boxes and pass-through devices cannot support high-speed, bi-directional
transfer of data, and using them may cause printing errors.
4
Parallel interface
connector
Cable
Interface connector
Bail clip