HOLD JOB LIST
If "Hold After Print", "Hold Before Print" or "Proof Print" operation is performed on the computer, print data will be held
as a hold job. A maximum of 100 jobs can be held. Print data held by this function will not be erased even if the main
switch is turned off.
If the number of jobs exceeds 100, the job is processed as follows.
G If Hold After Print is executed:
Printing will be executed but the job will not be held. (A notice page will be printed. See
G If Hold Before Print is executed:
Printing will not be executed and the job will not be held. (A notice page will be printed. See
G If Proof Print is executed:
Printing of one set will be executed but the job will not be held. (A notice page will be printed. See
If the above error occurs and the Printer Status Monitor has been installed, the error message will appear in the
Printer Status Monitor.
1
Press the [PRINT] key to display the
printer basic screen.
2
Select the desired data.
PRINT HOLD JOB LIST
SHARP001
Microsoft Word -
SHARP002
Microsoft PowerPo
SHARP003
product_infomatio
SHARP004
cost.xls
3
Use the [Numeric] keys to enter the 5-digit
password.
(Required only if a password has been set.)
B.
OB LIST
ENTER PIN VIA THE 10-KEY.
CANCEL
cost.xls
TABLE OF CONTENTS
To switch the screen,
touch the
or
key.
Be sure to enter the
password that has been
entered on the computer.
If no password has been
set, this step is not
needed. Each time a
number is entered, "–"
will change to "
".
BEGINNING OF CHAPTER
4
Ensure that the desired number of prints is
set.
NUMBER OF PRINTS
(1 999)
1
5
Execute printing.
product_information.pdf
CANCEL
PRINT AND DELETE THE DATA
DELETE
PRINT AND SAVE THE DATA
To cancel printing and clear the print data, touch
the [DELETE] key.
GIf you select execution of the print job, printing
will start. If another job is being printed, your
job will be stored as a print job. Your job will
be
printed
after
completed.
6
Operation is now complete.
page
8-3.)
page
8-3.)
page
8-3.)
The number of prints can
be changed by using the
or
key.
To delete the print data
after completing the print
job, touch the [PRINT
AND
DELETE
THE
DATA] key. To keep the
print data after printing,
touch the [PRINT AND
SAVE THE DATA] key.
preceding
jobs
are
5-2
Sayfayı Yazdır