Sharp AR-M162 Kullanım Kılavuzu - Sayfa 17

Hepsi Bir Arada Yazıcı Sharp AR-M162 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Sharp AR-M162 35 sayfaları. Digital copier
Ayrıca Sharp AR-M162 için: Hızlı Referans Kılavuzu (44 sayfalar), Kullanıcı Kılavuzu (3 sayfalar)

Sayfayı Yazdır

SCANNING FROM A TWAIN-COMPLIANT

APPLICATION

The SHARP scanner driver is compatible with the TWAIN standard, allowing it to be used with a variety of

TWAIN-compliant applications. The procedure for scanning from some applications may differ in places from the

procedure below. For more information, refer to the manual or the help file of your application.

Place the original(s) that you wish to

scan on the document glass or in the

SPF.

For information on placing an original for

scanning, see "4. COPY FUNCTIONS" in the

"Operation manual (for general information and

copier)".

Start up a Twain-compliant

application and select [Select

Scanner] from the [File] menu.

Select [SHARP MFP TWAIN G] and

then click the [Select] button.

• If you are using Windows XP, you can

Note

also select [WIA-SHARP AR-XXXX] to

scan using the WIA driver.

SCANNING FROM A WIA-COMPLIANT

APPLICATION (WINDOWS XP) (page 20)

• Depending on your system, [SHARP MFP

TWAIN G 1.0 (32-32)] or [WIA-SHARP

AR-XXXX 1.0 (32-32)] may appear in the

above select source screen.

Select [Acquire Image] from the [File]

menu.

The scanner driver setup screen will appear.

SCANNER DRIVER SETTINGS (page 18)

In the "Scanning Position" menu,

select the location where you placed

the original in Step 1.

• If you placed a one-sided original in the SPF,

select [SPF (Simplex)].

• If you placed a two-sided original in the RSPF,

select [SPF (Duplex-Book)] or [SPF

(Duplex-Tablet)].

• If you selected [SPF (Duplex-Book)] or

Note

[SPF (Duplex-Tablet)] from the "Scan

Position" menu, select [Right Edge Fed

First] or [Leading Edge Fed First] for the

orientation of the original.

• For original sizes for which two-sided

scanning is possible, see "REVERSING

SINGLE PASS FEEDER / SINGLE PASS

FEEDER" in "3. PERIPHERAL DEVICES

AND SUPPLIES" in the "Operation

manual (for general information and

copier)".

Click the [Preview] button.

The preview image will appear.

• If the angle of the image is not correct,

Note

reset the original and click the [Preview]

button again.

• If the preview image is not oriented

correctly, click the [Rotate] button in the

preview screen. This rotates the preview

image 90 degrees clockwise, allowing you

to correct the orientation without resetting

the original.

Preview screen (page 19)

• If you inserted multiple pages in the SPF,

the machine previews only the top page of

the originals and then sends it to the

original exit area. Return the previewed

original to the SPF before starting the

scanning job.