Sharp AR-M208 Servis Kılavuzu - Sayfa 3
Hepsi Bir Arada Yazıcı Sharp AR-M208 için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Sharp AR-M208 32 sayfaları. Digital laser copier/ printer
Ayrıca Sharp AR-M208 için: Anahtar Kullanım Kılavuzu (24 sayfalar)
The AR-M208 is a modified version of the AR-235/275, and is provided with the RSPF and the GDI printer function. (For contents of the RSPF, refer
to the AR-RP3 Service Manual.)
The different points of the AR-M208 from the AR-235/275 are shown in the table below.
AR-235/275
Item
Page
[1]
NOTE FOR SERVICING
[2]
SYSTEM CONFIGURATION
2 - 1
1. Structure
Block diagram
2 - 2
2. System outline (Options)
[3]
SPECIFICATIONS
3 - 1
2. - B. - (2) Picture quality mode
2. - B. - (3) Copy magnification ratio
2. - B. - (4) - b. Multi copy speed (sheets/
3 - 2
2. - B. - (6) - a. Image process
2. - B. - (6) - d. Resolution
3 - 3
3. - C. - (6) Scanning speed
3. - E. Image process section
3 - 4
6. "Sharp Printer Language with Compression
(SPLC)" Printer mode
[4]
CONSUMABLE PARTS
[5]
UNPACKING AND INSTALLATION
[6]
EXTERNAL VIEW AND INTERNAL STRUCTURE
6 - 1
1. External view
6 - 4
5. Sensor
[7]
ADJUSTMENTS, SETTING
7 - 2
2. - A. - (3) Developing bias voltage adjustment
(SIM 8-1)
2. - A. - (4) Grid bias voltage adjustment
(High mode) (SIM 8-2)
2. - A. - (5) Grid bias voltage adjustment
(Low mode) (SIM 8-3)
2. - B. - (2) Print start position adjustment
7 - 3
2. - B. - (5) Paper off center adjustment
2. - B. - (6) Left edge void area adjustment
7 - 9
2. - C. - (1) Copy mode (SIM46-2)
[8]
SIMULATION
8 - 7
Sim3-3
8 - 10
Sim8-1
8 - 11
Sim8-2, Sim8-3
Sim8-10
8 - 12
Sim8-11, Sim8-12
8 - 13
Sim9-1
Content
minute)
Content of change
No change
Block diagram is changed.
Main unit
AR-235/275 is changed into AR-M208
Options
AR-RP3 is provided as a standard equipment.
AR-VR3, AR-SP4 is deleted.
AR-D11 is changed into AR-D11N.
AR-D12 is changed into AR-D12N.
AR-FN5 is changed into AR-FN5N.
Super Photo mode is deleted.
SPF is deleted.
Fixed magnification mode of RSPF is changed.
1200dpi mode is deleted.
Change
Super Photo mode is deleted.
Change (Pseudo resolution is deleted.)
1200dpi is deleted.
Imaging speed of 1200 dpi is deleted.
Toner Life is changed.
"Sharp Printer Language with Compression
(SPLC)" Printer mode is added.
Maintance Kits changed.
No change
Platen cover (optional) is changed into RSPF
Added (Dehumidification heater switch)
Change (Abbreviation code is added/change.)
Default of SUPER PHOTO of "5: Super" in the
table of Adjustment specification is changed to
disabled.
Sim50-5
Modulation means for compulsory
specification of tray are added.
(Remark)
Sim50-10 Modulation means for compulsory
specification of tray are added.
(Remark)
Sim50-1
Modulation means for compulsory
specification of tray are added.
(Remark)
(16) SPF scan position auto adjustment is added.
SUPER PHOTO in the table of Adjustment
specification is deleted.
4: FM-1200 is changed to disabled.
Default of SUPER PHTO is changed to disabled.
Note is added.
Default of 7: DENS1(1200) to 11: DENS5(1200) is
changed to disabled.
2: DFM1200 and 4: DMR1200 are changed to
disabled.
I
AR-M208
Remarks
Refer to page 2-1, 2 of the
appendix.
Refer to page 3-1 – 4 of
the appendix.
Refer to page 6-1 – 2 of
the appendix.
Refer to SIM8-1, 2, and
SIM8-3 on page 8-1, 2 of
the appendix.
Refer to SIM50-5 on page
8-10 of the appendix.
Refer to SIM50-10 on
page 8-11 of the
appendix.
Refer to SIM50-1 on page
8-10 of the appendix.
Refer to page 7-1 of the
appendix.
Refer to page 8-1 – 13 of
the appendix.