Sharp AR-M256 Çevrimiçi Kılavuz - Sayfa 7

Hepsi Bir Arada Yazıcı Sharp AR-M256 için çevrimiçi göz atın veya pdf Çevrimiçi Kılavuz indirin. Sharp AR-M256 36 sayfaları. Digital multifunctional system key operator's guide
Ayrıca Sharp AR-M256 için: Kullanım Kılavuzu (4 sayfalar), Kurulum Kılavuzu (20 sayfalar), Kullanım Kılavuzu (48 sayfalar), Anahtar Kullanım Kılavuzu (24 sayfalar)

Sayfayı Yazdır

Basic printing

When the "Paper Selection" setting is "Paper Source" or "Paper Type"

When "Paper Selection" in the "Paper" tab of the printer driver

setup screen is set to:

"Paper Source", select the tray that you wish to use for

●

printing from the pull-down menu.

●

"Paper Type", select the type of paper that you wish to use

for printing from the pull-down menu.

"Paper Source" and "Paper Type" cannot be

Note

simultaneously selected.

The size and type of paper loaded in each tray and whether or

not the paper loaded in each tray can be used for printing are

specified in the "TRAY SETTINGS" of the custom settings.

(See "CUSTOM SETTINGS" in the operation manual for

copier.

If you wish to select the "Paper Source" or "Paper Type" when

printing, be sure to select these settings in the "Configuration"

tab of the printer driver setup screen. (See "CONFIGURING

THE PRINTER DRIVER" in the software setup guide.)

C O N T E N T S

If you selected the "Paper Source" or "Paper Type" in the printer

driver setup screen but there is no paper in the trays that

matches your selection, printing will take place as follows:

You selected a tray in "Paper Source", but the size

of the paper in the selected tray does not match

the printing size.

Even though the paper size is different, printing will take place

using the paper in the selected tray.

You selected a "Paper Type", and although the

selected type of paper is loaded in the machine, its

size does not match the printing size.

Even though the paper size is different, printing will take place

using the selected paper type.

However, if "FORCED OUTPUT OF PRINT" is disabled,

printing will not take place.

You selected a "Paper Type", but the selected type

of paper is not loaded in the machine.

If the bypass tray can be used, a message prompting you to

print from the bypass tray will appear. Press the [PRINT] key on

the operation panel, touch the [BYPASS TRAY] key, load the

correct size and type of paper in the bypass tray, and then

touch the [BYPASS] key. Printing will begin automatically.

(part 3)