Sharp AR-M550U Teknik Kılavuz - Sayfa 20

Hepsi Bir Arada Yazıcı Sharp AR-M550U için çevrimiçi göz atın veya pdf Teknik Kılavuz indirin. Sharp AR-M550U 48 sayfaları. Digital multifunctional system
Ayrıca Sharp AR-M550U için: Anahtar Kullanım Kılavuzu (20 sayfalar)

Sayfayı Yazdır

Requirement:

• PC with Parallel (configured to ECP Mode), USB or Ethernet Port

• IEEE1284 Centronics or USB Type "A to B" or Ethernet cable

• "Dragon Update" Tool & Firmware

• Print Driver installed and configured to the preferred "upgrade method" Port (eg USB).

Note: The AR-P19 must be "enabled" to upgrade via Ethernet and both devices (PC &

Machine) must have Static IP addresses entered.

Procedure:

1. Power off the Machine

2. Remove the cover that exposes the MFP Pwb.

3. To prepare the machine to receive the updated firmware, set the MFP control Dip

Switches to "Write Mode" (across to the left):-

4. Connect a Parallel, USB or Ethernet cable from the machine to the appropriate PC

connector.

5. Start Windows (Power on the PC).

Using Windows Explorer, browse to the folder that contains both Firmware Data file

and "Dragon Update Up" tool.(Both the Dragon Update.exe and the firmware file should

be in the same location).

FIRMWARE UPGRADE

February 2005