Sharp AR-M620U Teknik Kılavuz - Sayfa 30

Hepsi Bir Arada Yazıcı Sharp AR-M620U için çevrimiçi göz atın veya pdf Teknik Kılavuz indirin. Sharp AR-M620U 48 sayfaları. Digital multifunctional system
Ayrıca Sharp AR-M620U için: Anahtar Kullanım Kılavuzu (20 sayfalar)

Sayfayı Yazdır
Sharp AR-M620U Teknik Kılavuz
Test
Sub
Command
Code
38
41
26
50
52
68
01
27
05
01
30
02
01
02
40
07
11
12
01
41
02
03
43
01
01
02
04
05
44
09
12
14
16
02
09
10
11
12
13
46
14
15
16
17
18
19
TEST SIMULATIONS
Used to set continue/stop when developer life is reached.
Used to disable/enable auto magnification in pamphlet
mode.
Used to set up black and white reverse.
Used to set whether non-print paper is counted or not.
Enable or disable of the CA key.
Used to set communications between host and modem.
Sets machine tag number.
Main unit sensors check.
Paper feed tray sensors check.
Manual feed tray size sensor check.
Manual feed tray width sensor check tray.
Manual feed tray width adjustment setting.
Multi-purpose tray width check.
Multi-purpose tray width detection adjustment.
Document size sensor check.
Document size adjustment set up.
Document size set up display.
Fuser temperature set up.
Enable/disable correction operations in the image
process section.
Used to perform gain adjustment of the image density
sensor and drum mark sensor.
Used to set the target density level.
Used to set the reference developing bias, main grid
voltage and laser power.
Process control data display.
Used to display sapling toner image patch density
correction.
Used to check the output level of the temperature and
humidity sensors.
Used to check the toner concentration control data.
Adjust copy density in all copy modes.
Adjust print density in copy/text mode.
Adjust print density in copy/text/photo mode.
Adjust print density in copy/photo mode.
Adjust print density in fax mode (all modes).
Adjust print density in fax mode (normal).
Adjust print density in fax mode (fine text).
Adjust print density in fax mode (super-fine text).
Adjust print density in fax mode (ultra-fine).
Adjust gain in shading correction.
Adjust gamma density gradient in copy/fax mode.
Adjust gamma in auto copy/scan and fax mode.
30
Description
February 2005