Sharp AR-NB3 Baskı Kılavuzu - Sayfa 34
Hepsi Bir Arada Yazıcı Sharp AR-NB3 için çevrimiçi göz atın veya pdf Baskı Kılavuzu indirin. Sharp AR-NB3 41 sayfaları. Digital copier/printer/multifunctional system option
Ayrıca Sharp AR-NB3 için: Ağ Tarayıcı İşlemleri (40 sayfalar), Seçenekler Kılavuzu (44 sayfalar)
Sayfayı Yazdır
SPECIAL SETTINGS
IP address settings
This program is used to set the "IP ADDRESS", "SUBNETMASK", and "DEFAULT GATEWAY". The following
screen appears when this program is selected.
IP ADDRESS SETT-
INGS
IP ADDRESS
0
0
0
0
1
Enter the IP address, subnet mask,
and default gateway.
These move the cursor up and
down to select "IP ADDRESS",
[
][
] keys
"SUBNETMASK", and
"DEFAULT GATEWAY".
These move the cursor left
[
][
] keys
and right.
These are used to enter
Numeric keys
numbers.
[C] key (
)
Use this to cancel an entry.
This cancels an entry and
[BACK] key
returns you to the previous
screen.
This cancels the setting and
returns the display to the
base screen of the mode that
[CA] key (
)
was in effect before the key
operator programs were
entered.
This cancels the setting and
returns the display to the
[SPECIAL
base screen of the mode that
FUNCTION] key
was in effect before the key
operator programs were
entered.
2
When you have completed all
settings, press the [OK] key.
The settings will be saved.
3
Turn off the machine power, wait for a
few seconds, and then turn on the
power again.
The new settings will take effect after the power is
turned on.
KEY OPERATOR PROGRAMS
5
33