Sharp AR-NB3 Seçenekler Kılavuzu - Sayfa 8
Hepsi Bir Arada Yazıcı Sharp AR-NB3 için çevrimiçi göz atın veya pdf Seçenekler Kılavuzu indirin. Sharp AR-NB3 44 sayfaları. Digital copier/printer/multifunctional system option
Ayrıca Sharp AR-NB3 için: Baskı Kılavuzu (41 sayfalar), Ağ Tarayıcı İşlemleri (40 sayfalar)
Sayfayı Yazdır
(5) Recipient registration
• The mail address registered for each destination can be selected
from the mail address which is searched using LDAP.
• The information for each recipient includes the recipient name, IP address
or mail address, scanning size, format type, and scan parameter.
(6) Scanning size
• The scanning size is the size of the document sensed or predeter-
mined by the main unit(copier).
• If there is no information available about the document size from the
main unit(copier), scanning is performed according to the scanning
size predetermined in the destination registration section in advance.
However, a detected or predetermined document size takes prece-
dence over the information predetermined.
(7) Scanner limitations
• This unit should be connected to the USB port (USB-2) on the dual
function board of the main unit(copier).
C. FUNCTIONS BY INTERFACE
When the network expansion kit is connected, the following functions
are available by system interface.
System I/F
AR-NB3 I/F
SPLC
(main unit)
USB2.0
RJ45 (LAN)
No
USB1.1
Yes
IEEE1284
Yes
USB2.0
No
USB1.1
RJ45 (LAN)
Yes
IEEE1284
Yes
USB1.1
RJ45 (LAN)
No
IEEE1284
No
(*1): PS requires soft keys of the AR-PK1.
(*2): Some functions are not available.
D. NETWORK SETUP
Network setups should be performed by the system administrator. Use
a setup tool such as TCP/IP, Netware, Ether Talk or Web interface.
Function
GDI
PCL5e/6 PS (*1)
Net
Scan
No
Yes
Yes
Yes
No
No
No
No
No
No
No
No
No
Yes
Yes
No
No
No
No
No
No
No
No
No
No
Yes (*2) Yes (*2)
No
Yes
No
No
No
AR-NB3 SPECIFICATIONS
E.
SOFTWARE SETUP
The network expansion kit can be installed by setting up NIC, installing
a printer driver with the total installer, and installing Sharpdesk.
(1) Installing driver
The network expansion kit printer is connected only through the net-
work. The port setup required for installing a printer driver is the network
only. The following items should be set up.
• TCP/IP peer-to-peer port
1) Search for the network expansion kit on the network and select the
network expansion kit you want or enter the IP address of the appli-
cable network expansion kit to create a TCP/IP port.
2) Install the driver to the created port.
• Windows printer shared port
When the setup of the above client PC is completed and the printer is
set to "Windows shared printer," other client PCs can select this
printer shared port and then proceed to installation of the driver.
F.
HARDWARE SETUP
1) Requirements for connecting network expansion kit
• Dual function board mounted model is recommended
• Dual function board is surely required for network scanning
2) Connection to the main unit(copier)
• When Dual function board is used, connects with USB2.0 port of a
main unit(copier).
3) Power supply
Supplied by the main unit
1 – 6