Sharp BP-70C65 Hızlı Başlangıç Kılavuzu - Sayfa 11

Hepsi Bir Arada Yazıcı Sharp BP-70C65 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Sharp BP-70C65 46 sayfaları. Digital full colour multifunctional system
Ayrıca Sharp BP-70C65 için: Hızlı Başlangıç Kılavuzu (45 sayfalar)

Sayfayı Yazdır

PLACING ORIGINALS

The automatic document feeder can be used to automatically scan many originals at once, and this saves you the

trouble of manually feeding each original.

For originals that cannot be scanned using the automatic document feeder, such as a book or a document with notes

attached, use the document glass.

USING THE AUTOMATIC DOCUMENT FEEDER

When using the automatic document feeder, place the originals in the document feeder tray.

Make sure an original has not been placed on the document glass.

Adjust the original guides

to the width of the originals.

Loading a Business Card (BP-70C31/70C36/70C45/70C55/70C65)

When scanning a business card with the automatic document feeder, align the original guide to the size of the card.

USING THE DOCUMENT GLASS

Take care that your fingers are not pinched when closing the automatic document feeder.

After placing the original, be sure to close the automatic document feeder. If left open, parts outside of the original will be

copied black, causing excessive use of toner.

Set the orientation of the image to ensure that the orientation of the placed original is correctly recognized.

For details, see the User's Manual.

Place the original face down.

Align the top left corner of the

original with the

tip of the mark in the far left corner

of the glass.

BEFORE USING THE MACHINE

Place the originals face up with the edges aligned

evenly.

The indicator line indicates approximately

how many originals can be placed. The placed originals

must not be higher than this line.

Place the original

face down.