Sharp PN-L802B Hızlı Başlangıç Kılavuzu - Sayfa 25

Hepsi Bir Arada Yazıcı Sharp PN-L802B için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Sharp PN-L802B 28 sayfaları. Touchscreen
Ayrıca Sharp PN-L802B için: Kullanım Kılavuzu (9 sayfalar), Kullanım Kılavuzu (48 sayfalar), Kurulum Kılavuzu (28 sayfalar), Kullanıcı Kılavuzu (13 sayfalar), Hızlı Başlangıç Kılavuzu (1 sayfalar), Hızlı Başlangıç Kılavuzu (1 sayfalar), Hızlı Başlangıç Kılavuzu (1 sayfalar), Hızlı Başlangıç Kılavuzu (1 sayfalar), Başlangıç Kılavuzu (24 sayfalar), Garanti (2 sayfalar), Yazılım Kurulum Kılavuzu (46 sayfalar), Bağlantı Kılavuzu (1 sayfalar), Broşür ve Teknik Özellikler (4 sayfalar)

Sayfayı Yazdır

TO THE ADMINISTRATOR OF THE MACHINE

Forwarding all transmitted and received data to the administrator (document administration function)

This function is used to forward all data transmitted and received by the machine to a specified destination (Scan to E-mail address, Scan to FTP destination, Scan to Network

Folder destination, or Scan to Desktop destination).

This function can be used by the administrator of the machine to archive all transmitted and received data.

To configure the document administration settings, click [Application Settings] and then [Document Administration Function] in the [Settings mode] (Administrator-level access

privileges are required.)

•

The format, exposure, and resolution settings of transmitted and received data remain in effect when the data is forwarded.

•

When forwarding is enabled for data sent in fax mode,

•

The [Direct TX] key does not appear in the touch panel.

•

Quick online transmission and dialing using the speaker cannot be used.

Settings mode password

The administrator password is required to change the machine's settings mode.

Settings mode can be changed from either the operation panel or using a computer

web browser. After setting up the machine, refer to [Settings mode] in the Operation

Guide (PC) to set a new password.

The same passwords are used for logging in from the operation panel and from a web browser. If

the administrator changes a password, that password will be effective when logging in from both the

operational panel and a web browser.

User

Administrator

System Administrator

Please take care not to forget newly set administrator passwords.

Account

Password

users

admin

sysadmin

Password for logging in from a computer

There are three accounts that can log in from a web browser: "Administrator",

"System Administrator" and "User". The factory default passwords for each account

are shown on the below. Logging in as an "Administrator" or "System Administrator"

will allow you to manage all the settings available via web browser.

(Cut along the dotted line and keep in a safe place.)