Sharp SJ-44L-WH2 Servis Kılavuzu - Sayfa 20
Buzdolabı Sharp SJ-44L-WH2 için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Sharp SJ-44L-WH2 28 sayfaları. Sharp refrigerator-freezer service manual
Sayfayı Yazdır
SJ-44L
SJ-48L
(2)-4. Replace Def. heater ass'y with new one.
Drain support al
Fig. A-22
(2)-5. Wind the Glass cloth tape (3M: No. 27) to lead wire
of Def. heater ass'y. (2 places)
Def. heater ass'y
360
+
(40) 50
5
Glass cloth tape
(W40 x L25)
Lead wire
Glass cloth tape
Wind the Glass cloth tape
more than 2 turns.
Fig. A-23
(2)-6. Bend a and b of Drain support al to right angle
(90˚) to set Def. heater ass'y. (Fig. A-24)
This side is longer wire
a
Drain support al
Def.heater ass'y
Fig. A-24
Heater cover
Def.heater ass'y
+ 5
(40)
This side is shorter wire
b
(2)-7. Stick the longer wire to the Drain support by
aluminum tape (2 pieces), and wind vinyl tape
(2 pieces) to lead wires of Def. heater ass'y by
aluminum tape as shown in Fig. A-25.
Note: Glass cloth tape part shall be both side of Drain
support to protect the lead wire from damaged.
Sec. AA
(2)-8. Set Heater cover on Drain support, and bend top
edge c and d to outside as shown in Fig. A-26.
Drain support al
Heater cover
c
(2)-9. Wind up Leading wire sealer as shown in Fig. A-27
Drain support al
Def.heater ass'y
(2)-10. Set the assembly above on the food liner by fixing
a screw.
20
Glass cloth tape
Glass cloth tape
A
A
[back side]
aluminum tape
(W25 X L40)
Glass cloth tape
Glass cloth tape
(more than 2 turns)
[bottom side]
Fig. A-25
Heater cover
top edge
Def.heater ass'y
Sec. BB
d
Def.heater ass'y
B
B
Fig. A-26
Heater cover
Leading wire sealer
Fig. A-27