Crestron 64X64 DigitalMedia Hızlı Başlangıç Kılavuzu

Anahtar Crestron 64X64 DigitalMedia için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Crestron 64X64 DigitalMedia 2 sayfaları.

Sayfayı Yazdır

Crestron 64X64 DigitalMedia Hızlı Başlangıç Kılavuzu

DM-MD64X64

1 1

Introduction

Input/output (I/O) blades and the CPU blade are installed

prior to shipment of the Crestron

DM-MD64X64.

The DM-MD64X64 can contain up to eight input blades

and eight output blades. Input blades occupy input slots

1-8. Output blades occupy output slots 1-8. The following

illustration shows an input blade in input slot 1, an output

blade in output slot 8, and the CPU blade in the CPU slot.

Input Slots 1-8

Output Slots 1-8

For details, refer to the latest version of the DM-MD64X64

DigitalMedia Switcher Operations & Installation Guide, Doc. 7318.

QUICKSTART DOC. 7319A (2035907)

64X64 DigitalMedia

™

Connecting Input Blades

DMB-I-S

Provides eight DM 8G

fiber

inputs that connect to DM 8G

fiber outputs of DM

transmitters or other DM

devices using multimode fiber

optic cable (sold separately).

Using CRESFIBER8G, the

maximum transmission

distance is 1000 feet

(~300 meters). Using

CRESFIBER, CRESFIBER-

SINGLE-SC, or third-party

OM3 simplex multimode fiber

optic cable, the maximum

transmission distance is 500

feet (~150 meters).

CPU Blade

DMB-I-S2

Provides eight DM 8G SMF

inputs that connect to DM 8G

SMF outputs of DM

transmitters or other DM

devices using single-mode

fiber optic cable (sold

separately). Using

CRESFIBER8G-SM or

third-party G.652.D (or better)

single-mode fiber optic cable,

the maximum transmission

distance is 7.5 miles (12 km).

www.crestron.com

02.13

Specifications subject to

change without notice.

Switcher

Connecting Output Blades

DMB-O-S

Provides eight DM 8G fiber

outputs that connect to DM

8G fiber inputs of DM

receivers or other DM devices

using multimode fiber optic

cable (sold separately). Using

CRESFIBER8G, the

INPUT

maximum transmission

MMF/SC:

distance is 1000 feet

From DM 8G

(~300 meters). Using

Fiber Output

CRESFIBER, CRESFIBER-

of DM

Transmitter

SINGLE-SC, or third-party

OM3 simplex multimode fiber

Other DM

optic cable, the maximum

Device

transmission distance is

500 feet (~150 meters).

DMB-O-S2

Provides eight DM 8G

single-mode fiber outputs that

connect to DM 8G SMF

inputs of DM receivers or

other DM devices using

single-mode fiber optic cable

(sold separately). Using

INPUT

CRESFIBER8G-SM or

SMF/LC:

third-party G.652.D (or better)

From DM 8G

single-mode fiber optic cable,

SMF Fiber

the maximum transmission

Output

of DM

distance is 7.5 miles (12 km).

Transmitter

or Other

DM Device

888.273.7876

201.767.3400

1 4

Connecting the CPU Blade

DMB-CPU-64

Provides 10BASE-T/

100BASE-TX/1000BASE-T

LAN port and computer

console SERVICE port.

NOTE: The AUDIO

OUT port is reserved

for future use.

OUTPUT

MMF/SC:

To DM 8G

Fiber Input

of DM

Receiver or

Other DM

Device

1 5

Applying Power

NOTE: The DigitalMedia™ switcher requires two 20 A

@ 100-127 Vac or two 10 A @ 200-240 Vac circuits.

The DigitalMedia switcher contains two power supplies to

provide load balancing and power redundancy. To apply

OUTPUT

power to the switcher, connect the two supplied ac power

SMF/LC:

To DM 8G

cords to the two power inlets of the switcher. Connect the

SMF Fiber

other end of the power cords to ac power using the same

Input

ac voltage type—either 120 Vac or 220 Vac.

of DM

Receiver or

Other DM

Device

100-127V ~ 50/60Hz 16A,

200-240V ~ 50/60Hz 8A:

From AC Power Outlet

LAN:

10BASE-T/100BASE-TX/

1000BASE-T

Ethernet to LAN

SERVICE:

10BASE-T/100BASE-TX/

1000BASE-T

Computer Console Port

AUDIO OUT:

(For Future Use)

To Analog Audio Input

From AC Power Outlet