Digital Acoustics IP7-FD Başlangıç Kılavuzu - Sayfa 4

İnterkom sistemi Digital Acoustics IP7-FD için çevrimiçi göz atın veya pdf Başlangıç Kılavuzu indirin. Digital Acoustics IP7-FD 4 sayfaları.

Sayfayı Yazdır

Relay Options

• Door Open - adds an ICON in the Operator Console to activate the Relay

for an electronic door strike

• PTT - Activates the Relay when the 'Talk' switch (J2-5) is grounded

• Activate on Speaker and/or Mic - activates the Relay when either or both

of the IP7 audio channels are active

Sensor Options - Used in conjunction with Door Open Relay. Changes the

color of the ICON in the Operator Console when the door is open

• Active when Closed to Ground - when J3-5 is closed to ground

• Active when Open to Ground - when J3-5 is open to ground

Options 2 tab

IP Endpoints can be optionally assigned to Queues

• Assigned Queue – select the Queue that the IP7 has been assigned to

Change additional IP7 Configuration Options and click SAVE when changes

have been completed

Press the Update Now button and close the Admin Console

Start the Operator Console

• Logon with the assigned Operator ID and

Password or as the admin

• Specify the IP Address of the TalkMaster

Server (specify 127.0.0.1 if the Operator

Console is running on the TalkMaster

Server PC)

• IP Endpoints will appear on the Intercoms tab or as part of the Paging

Groups tab of the Operator Console

• The PC's microphone is used to send audio to an IP Endpoint.

• The audio from an IP Endpoint can be heard on the PC's speakers

• A headset or handset (such as the Polycom CX200) should be used on the

PC to prevent echo at the Call Station

Inbound Calls

• When the Talk button attached to the IP7 is pressed, Operator Console will

display the Incoming Call dialog and sound an audible alarm

• Click the Start button, or tap the Space Bar to speak to the IP Endpoint

• Click the Mute/Unmute button to temporarily disable/enable the PC's

microphone

• All incoming calls will be listed in the Calls Waiting and remain "in session"

until removed from the Calls Waiting list by clicking the End button, or

pressing the Escape key

Outbound Calls

• To initiate an outbound call, select an IP Endpoint by clicking on it, then

click the Start button

• Click the green End button or tap the Space Bar to end the call

Open Door

• To open a door, select the Intercom, the click the Door Open Icon or press

the Enter key

Refer to the IP7-FD Hardware Reference Manual for detailed information on wiring,

setup, configuring IP addresses and additional software settings.

IP7-FD GettingStartedGuide.docu TalkMaster, IP7 and Digital Acoustics® are

trademarks of Digital Acoustics LLC. Other trademarks are the property

www.digitalacoustics.com/support

Page 4 of 4

IP7-FD ™

Getting Started Guide

p/n 6624