Sharp SJ-XE676F Kullanım Kılavuzu - Sayfa 11

Buzdolabı Sharp SJ-XE676F için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Sharp SJ-XE676F 16 sayfaları. Refrigerator - freezer

Sayfayı Yazdır

Care and cleaning

Important

To prevent cracks on the inside surfaces and plastic

components, follow these tips .

• Wipe out food oil that has adhered to plastic parts.

• Some household chemicals may cause damage, so use

only diluted washing-up liquid (soapy water).

• Wipe any spills from the refrigerator immediately as acid

or alkaline in the food can cause cracking and staining

of plastic parts.

Cleaning

■ Remove the accessories (e.g. shelves) from the cabinet

and the door. Wash them with warm soapy dishwashing

water. After that, rinse them in clean water and dry.

(Only fruit and vegetable shelf is not removable.)

How to remove the fruit and vegetable

crisper cover

■ Clean the inside with a cloth soaked in warm soapy

dishwashing water. Then, use cold water to wipe off

soapy water thoroughly.

■ Wipe the exterior with a soft cloth each time it gets

dirty.

■ Clean the Magnetic door seal with a toothbrush and

warm soapy dishwashing water.

■ Wipe the control panel with a dry cloth.

Note

• Do not use hot water, household cleaning powders,

creams or spray-on cleaning products, or any other

cleaning products such as mineral turpentine,

methylated spirits, thinners, petrol etc. These may

damage your refrigerator and may void any warranty.

• If the power supply is disconnected, please wait at least

5 minutes before re-connecting power.

• The glass shelves weigh approximately 3 kg each. Hold

them firmly when removing from the cabinet and carry.

• Do not drop objects inside the refrigerator or strike the

inner wall. This may cause cracks to the inner surface.

Tips for saving energy

■ Keep the ventilation space as much as possible around the refrigerator.

■ Keep your refrigerator out of direct sunlight, and do not place it next to a heat generating appliance.

■ Avoid opening the door as much as possible.

■ Hot foods should be cooled before storing.

■ Place the food evenly on the shelves to allow the cool air to circulate efficiently.

Hole

Projection portion

Before transporting

Wipe up water in the evaporating pan. Before wiping

up the water, wait more than 1 hour after pulling out the

power plug because the refrigeration cycle equipment

is extremely hot.

(The evaporating pan is located on the rear of the

product.)

Switching off your refrigerator

If the refrigerator needs to be switched off for an

extended period, the following steps should be taken to

reduce the growth of mould:

1. Remove all food.

2. Remove the power plug from the power point.

3. Clean and dry the interior thoroughly.

4. Ensure that all the doors are wedged open slightly

for air circulation.

Defrosting

Defrosting is automatically operated by a unique energy

saving system.

When the compartment light is blown

Contact the service agent approved by SHARP to

replace the light. The light is not to be replaced other

than by a qualified service personnel.

Evaporating pan