Sharp SJEX98FSL Kullanım Kılavuzu - Sayfa 18
Buzdolabı Sharp SJEX98FSL için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Sharp SJEX98FSL 24 sayfaları.
Ayrıca Sharp SJEX98FSL için: Kullanım Kılavuzu (24 sayfalar)
![Sharp SJEX98FSL Kullanım Kılavuzu](/uploads/products/server2/5055120/5055120.jpg)
Control panel
Select
button
Switching
button
Enter
button
Operations of useful modes
Select the mode icon.
1
Select on/off.
2
Complete the setting.
(Beep)
3
"Express cool"only
Complete the setting by pressing
for 3 seconds or more.
(Beep, Beep, Beep)
Operation of additional modes
Door alarm • When the refrigerator or freezer door is left open for over
1 minute, door alarm sounds once, and again after 1
minute.
• If the door is left open for approx. 3 minutes, the alarm
sounds continuously.
• The alarm stops after close all the door.
• When you want to switch off button operation sound.
Sound
of button
operation
Note
• When you want to turn on the additional mode, follow the same step again. (The indicator turns on.)
18
Useful modes
Icon
Meaning
Extra cool
Express freezing
Express cool
Controlling temperature
Icon
Meaning
Refrigerator
compartment
Freezer compartment
Additional modes
Indicator
Meaning
Door alarm
Sound of button
operation
Display
(e.g. Extra cool)
Mode icon turns
on.
"Express cool"
only
(Flashing)
Summary
Default setting
OFF
Default setting
3°C
-18°C
Default setting
ON
When press
change in the order shown as below.
Flashing
(off)
Mode icon turns
off on the standby
display.
Cancel operation
Press
for 3 seconds or more.
(Beep, Beep, Beep)
Press
for 3 seconds or more.
(Beep, Beep, Beep)
Note
• When you press one of the
buttons, all icons flash once and
show the standby display. If the
refrigerator stops because of
power failure, the modes except
for Extra cool and Express
freezing function the same way as
before at the time of re-power.
• Operation is invalid while the
refrigerator door is open.
• Mode icons or indicators
in operation light up on
the standby display.
When Express cool is
in operation, the icon
flashes on the standby
display.
• When there is no
operation for
approximately
1 minute, the display returns to
the standby display automatically.
The standby display turns off if
there is no operation for another
1 minute.
button, the icons
Standby display
:
Useful modes
and
simultaneously
The indicator
and
simultaneously
The indicator
Turn-on state
Display
turns off.
turns off.