Sharp SJG2351FS Kullanım Kılavuzu ve Kurulum Talimatları - Sayfa 9
Buzdolabı Sharp SJG2351FS için çevrimiçi göz atın veya pdf Kullanım Kılavuzu ve Kurulum Talimatları indirin. Sharp SJG2351FS 20 sayfaları.
Sayfayı Yazdır
LEVELING THE DOORS
Precautions before operation
1. Before operation of accessories, it shall be ensured that the
refrigerator is disconnected from power. Before adjusting
the door, precautions shall be taken to prevent any personal
injury.
2. Raise the lower door up to the level of the higher door.
3. Insert the supplied fastener-ring by using pliers in the gap
between the hinge-grommet and the lower hinge.
The number of fasten-rings you will need to insert depends
on the gap. See Figure 5.
List of tools to be provided by the user
Pliers
Schematic diagram of adjusting the door.
Not level
Figure 5
Hinge
grommet
Pliers
Fastener-ring
Lower hinge
INSTALLATION INSTRUCTIONS
CONNECTING THE WATER LINE
INSTALLING THE WATER LINE
Water line installation kits are available as an additional
accessory from your dealer or at a local hardware store.
CONNECTING TO THE WATER SUPPLY LINE
1. First, shut off the main water supply line. See Figure 6.
2. Locate the nearest cold water supply valve.
3. After connecting the water supply to the water valve, turn
your main water supply back on and flush several gallons of
water to clear the water supply line.
CONNECTING THE WATER LINE TO THE
REFRIGERATOR
There are several items that you need to purchase to complete
this connection.
You will find these items sold as a kit at your local hardware
store.
1. First, water tubes (supplied) insert into corresponding hole
of water connector (supplied). See Figure 7.
2. Second. water line installation kit (not included) inserts into
another hole of water connector (supplied).
3. Turn water valve on and check for any leakage.
Water line installation kit
9
Figure 6
Water tube
Water connector
Figure 7