Sharp AJ-1800 - Notevision PG-M10X XGA DLP Projector Kullanım Kılavuzu - Sayfa 33

Projektör Sharp AJ-1800 - Notevision PG-M10X XGA DLP Projector için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Sharp AJ-1800 - Notevision PG-M10X XGA DLP Projector 49 sayfaları. Colour inkjet printer
Ayrıca Sharp AJ-1800 - Notevision PG-M10X XGA DLP Projector için: Kullanım Kılavuzu (49 sayfalar), Temel Bilgiler & Hazırlıklar (10 sayfalar), Kullanım Kılavuzu (47 sayfalar)

Sharp AJ-1800 - Notevision PG-M10X XGA DLP Projector Kullanım Kılavuzu

Setting in Accordance With Image Content

Advanced Menu Settings (continued)

Setting the COMPUTER input terminal

The COMPUTER input terminal can be switched and used
as the component video signal (YP
1
With the FLIP COVER of the remote control
open, press the MENU button to display the
Advanced menu, then use the cursor
keys to select "COLOR".
2
Use the cursor
"SOURCE CHANGE".
3
Use the cursor
"SOURCE CHANGE".
The following can be selected.
G RGB G YP
P
B
R
Please select "YP
P
B
R
When component video (YP
the optional component video cable.
P
) input terminal.
B
R
/
/
keys to select
/
keys to set the
".
P
) input is used, use
B
R

Setting the Display Frame

The display frame can be set individually for each input.
1
Select the input for image selection (page
20).
2
With the FLIP COVER of the remote control
open, press the MENU button to display the
Advanced menu, then use the cursor
keys to select "VIEW".
3
Display the frame, then use the cursor
/
keys to select "ASPECT".
4
Use the cursor
"ASPECT" ratio.
Any of the following four different settings can be
selected for images.
G REAL (input signal projection without pixel
replacement)
G AUTO (projection after automatic input signal
zoom in/zoom out)
G DIRECT (the original aspect ratio of the image is
maintained at all times)
G 4:3 → 16:9 (4:3 aspect ratio images are projected
after conversion to 16:9 aspect ratio)

Setting Filter

This is used to set the sharpness during pixel conversion
(image compression/enlargement and video playback).
1
With the FLIP COVER of the remote control
open, press the MENU button to display the
Advanced menu, then use the cursor
keys to select "VIEW".
2
Display the frame, then use the cursor
/
keys to select "FILTER".
3
Use the cursor
sharpness.
To close the menu
Press the R-CLICK/EXIT button.
/
/
keys to set the
/
/
keys to set the
31