Sharp Notevision PG-D40W3D Kurulum Kılavuzu - Sayfa 26
Projektör Sharp Notevision PG-D40W3D için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Sharp Notevision PG-D40W3D 35 sayfaları. True xga/wxga data projectors
Ayrıca Sharp Notevision PG-D40W3D için: Kullanıcı Kılavuzu (2 sayfalar), Şartname Sayfası (2 sayfalar), Teknik Özellikler (2 sayfalar), Broşür ve Teknik Özellikler (2 sayfalar)
Sayfayı Yazdır
Setting up the Projector Using RS-232C or Telnet
The setting procedure for each item will be explained. For the basic procedure, please
refer to "Set Items" on page 24.
IP Address Setting
([1]IP Address)
Setting of IP address.
setup>1
IP Address
:192.168.150.2
Please Enter
:192.168.150.3
(change)
—>
192.168.150.3
1 Enter "1" and press the "Enter" key.
2 Enter numerical value to be set and press
the "Enter" key.
Display IP address after change (*).
Subnet Mask Setting
([2]Subnet Mask)
Setting subnet mask.
setup>2
Subnet Mask
:255.255.255.0
Please Enter
:255.0.0.0
(change)
—>
255.0.0.0
1 Enter "2" and press the "Enter" key.
2 Enter numerical value to be set and press
the "Enter" key.
Display subnet mask after change (*).
-26
Default Gateway Setting
([3]Default Gateway)
Setting default gateway.
1
setup>3
note: "0.0.0.0" means "Using no default gateway."
2
Gateway Address :0.0.0.0
Please Enter
*
(change)
—>
1 Enter "3" and press the "Enter" key.
2 Enter numerical value to be set and press
the "Enter" key.
Display gateway address after change (*).
Note
•
If the values for IP Address, Subnet Mask or
Gateway of the projector have been changed
via Telnet, the computer cannot be connected
to the projector depending on the computer's
1
network settings.
2
*
User Name Setting
([4]User Name)
Carrying out security protection using user
name.
setup>4
User Name
Please Enter
(change)
—>
1 Enter "4" and press the "Enter" key.
2 Enter user name and press the "Enter" key.
Display set user name (*).
Note
•
User name can be up to 8 characters.
•
You can input the characters below:
a-z, A-Z, 0-9, -, _
•
In the default state, user name is not set.
:192.168.150.1
192.168.150.1
:
: XX-XXXX
XX-XXXX
1
2
*
1
2
*