Sharp XV-Z7000E Kullanım Kılavuzu - Sayfa 39
Projektör Sharp XV-Z7000E için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Sharp XV-Z7000E 48 sayfaları. Sharp projector operator's manual
Sayfayı Yazdır
Replacing the Projection Lamp
Then Change Lamp (Steps 7-10)
7
Remove the lamp cage cover.
Turn over the projector and loosen the user service
screw that secures the lamp cage cover. Then lift
open the cover in the direction of the arrow.
9
Insert the new lamp cage.
Press the lamp cage firmly into the lamp cage
compartment. Fasten the securing screws.
Resetting the lamp timer
1
Connect the power
cord.
Plug the power cord into the AC
socket of the projector.
• Reset the lamp timer only after replacing the lamp.
39
8
Remove the lamp cage.
Loosen the securing screws on the lamp cage.
Hold the lamp cage by the handle and pull it
towards you.
10
Slide the lamp cage cover in the direction of the
arrow. Then tighten the user service screw.
2
Reset the lamp timer.
1 Press KEYSTONE ∂ and
KEYSTONE ƒ on the projector at
the same time.
2 Press INPUT and PICT MODE on
the projector at the same time.
3 Press PICT MODE and MENU on
the projector at the same time.
1
INPUT
PICT MODE
BACK
ENTER
2
Attach the lamp cage cover.
"LAMP 0000H" is
displayed, indicating that
the lamp timer is reset.
MENU
3