Digital Acoustics IP7-MZC-FD Başvuru Kılavuzu

Kontrolör Digital Acoustics IP7-MZC-FD için çevrimiçi göz atın veya pdf Başvuru Kılavuzu indirin. Digital Acoustics IP7-MZC-FD 7 sayfaları.

The IP7-MZC-FD Multi-Zone Controller

central station call center to to communicate with up to forty-eight zones of microphones and speakers

(full-duplex) through a single IP audio connection. It also includes the ability to add an analog telephone

that can be used for private audio conversations with the call center over the IP connection. Any

combination of microphone and/or speaker zones can be turned on and off by the call center operator

either through custom applications or via a SIP based phone system.

This Application Guide presents some of the ways customers can integrate the IP7-MZC-FD into their

Alarm Monitoring system (which may have additional information on each of the zones the IP7-MZC-FD

is monitoring).

Using the TalkMaster FOCUS Administrator Console, select the I P Endpoints → Configuration tab.

The IP7-MZC-FD can be configured as a T alkMaster Client , a S IP Client or a hybrid T alkMaster/SIP

client . The T alkMaster FOCUS .NET Console SDK c an be used to develop custom applications if the

IP7-MZC-FD is configured as a TalkMaster Client or hybrid TalkMaster/SIP client. DTMF commands

can be used to control it if configured as a SIP Client.

The IP7-MZC-FD supports up to 48 full duplex audio zones created by attaching 1 or more IP7-ZX4L

expansion boards (each IP7-ZX4L adds four speaker/microphone zones). The IP7-MZC-FD detects

the number of IP7-ZX4L's attached at startup and calculates the number of available zones.

The IP7-MZC-FD includes:

● An onboard speaker and a switch to enable it (used for testing)

● An onboard microphone and a switch to enable it (used for testing)

● An RJ-11 connector for an analog telephone

Audio between the Call Center and the IP7-MZC-FD is always available to the onboard speaker and

microphone (if enabled by the switches) and to the analog telephone if it's handset is taken off-hook. A

command must be received from the central station in order to turn on or off zones on the attached

IP7-ZX4L zone boards.

The IP7-ZX4L Expansion boards include:

● Four 1 watt speaker terminals

● Four analog speaker volume controls

● Four 12V powered Line Level Microphone terminals (2-wire or 3-wire)

● Four analog microphone sensitivity controls

IP7-MZC-FD Application Guide

i s a network audio endpoint that provides the ability for a

IP7-MZC-FD Configuration Options

Page 1 of 7

37 Sherwood Terrace, Suite 111

Lake Bluff, IL 60044 U.S.A.

Tel 847-604-9256