Crestron 4 Series Hızlı Başlangıç Kılavuzu - Sayfa 5

Kontrolör Crestron 4 Series için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Crestron 4 Series 6 sayfaları. Control processor for zūm lighting control system
Ayrıca Crestron 4 Series için: Hızlı Başlangıç Kılavuzu (8 sayfalar), Hızlı Başlangıç Kılavuzu (8 sayfalar), Hızlı Başlangıç Kılavuzu (6 sayfalar), Hızlı Başlangıç (5 sayfalar), Hızlı Başlangıç Kılavuzu (6 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Başlarken (2 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Hızlı Başlangıç Kılavuzu (12 sayfalar)

RMC4

4-Series™ Control System

Create an Admin Account

The first time the web configuration interface is accessed, a dialog box is

displayed asking the user to create an admin account. A similar message

is displayed when connecting to the device in Crestron Toolbox software if

an admin account has not already been created.

To create an admin account:

1. Enter a username and password for the admin account in the

appropriate text fields.

CAUTION: Do not lose the username and password for the admin

account, as the device must be reset to factory settings to regain

access.

2. Click OK. A dialog box is displayed stating that enabling authentication

will restart the web session.

3. Click Yes to confirm and restart. The username and password created

in step 1 must be entered to regain access to the web configuration

interface.

NOTE: The username and password must also be entered when

connecting to Crestron Toolbox or XPanel.

Set the Time Zone

The time zone must be set on the control system to ensure that the

correct time settings are pushed to controlled devices.

To set the time zone:

1. Access the web configuration interface using either the device

IP address or the Crestron XiO Cloud service.

2. Navigate to Settings > System Setup.

3. Select the time zone where the control system is used from the Time

Zone drop-down menu.

4. Click Save Changes on the top right of the screen.

Pair with Apple HomeKit

The control system can be paired with Apple® HomeKit® technology to

enable communication between the control system and Apple HomeKit

devices and accessories.

For pairing instructions and to locate the unique QR code required for

pairing, refer to the RMC4 Product Information document

(Doc. 8541) that shipped with the RMC4.

Quick Start