Shimano ALFINE Inter-8 Bayi El Kitabı - Sayfa 34
Bisiklet Aksesuarları Shimano ALFINE Inter-8 için çevrimiçi göz atın veya pdf Bayi El Kitabı indirin. Shimano ALFINE Inter-8 49 sayfaları.
Sayfayı Yazdır
ADJUSTMENT
Adjusting the cassette joint
For internal 11-speed
1
(B)
2
(z)
Set the shift lever from 11 to 6 .
Check to be sure that the yellow setting
lines on the cassette joint bracket and
pulley are aligned at this time.
If the yellow setting lines are not
aligned, turn the cable adjustment barrel
of the shift lever to align the yellow
setting lines.
After this, move the shift lever once
more from 6 to 11 and then back to 6 ,
and then re-check to be sure that the
yellow setting lines are aligned.
(A)
After adjusting the cassette joint, cut off
the excess length of inner cable.
Then install the inner end cap.
After installing the inner end cap,
slightly bend the inner cable outward
(towards the dropout) so that it does not
touch the chain.
(z)
(A)
25 - 30 mm
34
(A)
Yellow setting lines
(B)
Cable adjustment barrel
TECH TIPS
•
The yellow setting lines on the cassette
joint are located in two places. Use the one
that is easiest to see.
< When bicycle is standing up >
Should be straight
Cassette joint pulley
Cassette joint bracket
< When bicycle is upside down >
Should be straight
Cassette joint pulley
Cassette joint bracket
(A)
Inner end cap