Shimano Alfine S7000 Series Bayi El Kitabı - Sayfa 21
Bisiklet Aksesuarları Shimano Alfine S7000 Series için çevrimiçi göz atın veya pdf Bayi El Kitabı indirin. Shimano Alfine S7000 Series 47 sayfaları.
Sayfayı Yazdır
- 1. Installation of the Cs-S500 Sprocket with Chain Guard
- 2. Installation of the Shifting Lever
- 3. Installation of the Shifting Cable
- 4. Adjusting the Cassette Joint
- 5. Replacement and Assembly of the Indicator Unit
- 6. For Internal 8-Speed (Oil Maintenance Kit: Y00298010)
- 7. In the Case of 11-Speed Internal Geared Hub (Oil Maintenance Kit: Y13098023)
INSTALLATION
Installation of the shifting cable
Cassette joint end
(x)
1
(A)
(B)
2
(z)
(y)
To be continued on next page
(A)
(B)
(C)
(D)
(y)
(z)
After checking that the end of the outer
casing is sitting securely in the cable
adjustment barrel of the shifting lever,
attach the inner cable fixing bolt unit to
the inner cable.
Then, pull the inner cable while
attaching the inner cable fixing bolt unit.
(x)
10 mm
(y)
145 mm
(z)
63 mm or less
Bring the cable around to the cassette
joint pulley, hold it so that the inner
cable fixing nut is facing to the outside
(toward the fork end), and then slide the
flats part (y) of the inner cable fixing
washer into the gap (z) in the pulley.
21
(A)
Inner cable fixing bolt unit
(B)
Inner cable fixing nut
(C)
Inner cable fixing washer
(D)
Inner cable fixing bolt
Tightening torque
3.5 - 5.5 N·m
NOTE
Do not use this inner cable fixing bolt unit
with the CJ-4S30 cassette joint.
TECH TIPS
When installing the inner cable fixing bolt
unit, use the setting tool TL-S700-B.
(A)
Inner cable fixing nut
(B)
Pulley