Shimano Alfine S7000 Series Bayi El Kitabı - Sayfa 37
Bisiklet Aksesuarları Shimano Alfine S7000 Series için çevrimiçi göz atın veya pdf Bayi El Kitabı indirin. Shimano Alfine S7000 Series 47 sayfaları.
Sayfayı Yazdır
- 1. Installation of the Cs-S500 Sprocket with Chain Guard
- 2. Installation of the Shifting Lever
- 3. Installation of the Shifting Cable
- 4. Adjusting the Cassette Joint
- 5. Replacement and Assembly of the Indicator Unit
- 6. For Internal 8-Speed (Oil Maintenance Kit: Y00298010)
- 7. In the Case of 11-Speed Internal Geared Hub (Oil Maintenance Kit: Y13098023)
MAINTENANCE
Replacement and assembly of the indicator unit
Installation
(A)
(B)
1
(C)
2
Operate the main and the release levers, to check their operation.
3
If they do not operate correctly, reinstall the indicator unit while taking particular note of
step 1.
Check that the needle of the indicator is
on the left side ( 8 position), and then
install the indicator unit so that it is
facing straight upward.
Insert the pin of the change plate that is
protruding from the bottom of the
(D)
indicator unit into the hole in the winder
unit at this time.
Secure the indicator unit with the two
(A)
cover fixing screws.
37
(A)
Indicator unit
(B)
Pin of change plate
(C)
Hole in winder unit ( 8 position)
(D)
Release lever
(A)
Cover fixing screws
Tightening torque
0.3 - 0.5 N·m