Shimano BR-M8000 Bayi El Kitabı - Sayfa 30

Bisiklet Aksesuarları Shimano BR-M8000 için çevrimiçi göz atın veya pdf Bayi El Kitabı indirin. Shimano BR-M8000 39 sayfaları. Hydraulic disc brake

MAINTENANCE

Replacing the brake hose

Brake lever side

If there is a marking as shown in the illustration, refer to the "How to replace the brake hose (easy hose joint

system)" section of General Operations.

(A)

(z)

To be continued on next page

Use a utility knife or other cutting tool

to cut the brake hose.

(z)

In order to check that the ends of the

(A)

brake hose are fitted securely into the

base of the brake hose mounts of the

brake calipers and brake lever, make

marks on the brake hose beforehand as

shown in the illustration.

(As a guide, the length of brake hose

inside the mount should be

approximately 11mm, measured from

the cut end of the brake hose.)

(z)

NOTE

90°

Approx. 11mm

Mark

NOTE

Use the utility knife safely and correctly in

accordance with its instruction manual.

TECH TIPS

If you are using TL-BH62, refer to the manual

accompanying the product.

(A)

Mark