Shimano DURA-ACE ST-7970 Manuel - Sayfa 10
Bisiklet Aksesuarları Shimano DURA-ACE ST-7970 için çevrimiçi göz atın veya pdf Manuel indirin. Shimano DURA-ACE ST-7970 17 sayfaları. Dual control lever. flight deck compatible.
Sayfayı Yazdır
6. B-tension adjustment bolt adjustment
Set the chain onto the small chainring and the
largest sprocket, and then turn the crank arm
backward.
Turn the B-tension adjustment bolt to adjust so
that the guide pulley moves close to the sprocket
without obstructing the chain.
Next, set the chain onto the smallest sprocket and
check in the same way that the guide pulley does
not obstruct the chain.
Adjustment of the front derailleur (FD-7970)
WARNING
When the shifting switch is operated, the motor
which drives the front derailleur will operate without
stopping at the shifting lever position.
Always be sure to remove the battery before carrying
out installation and adjustment, otherwise your
fingers may become stuck.
Note:
The low adjustment bolt, the top adjustment bolt and the
support bolt are close to each other. Make sure that you
are using the correct bolt for adjustment.
< Low adjustment >
Set the chain onto the small chainring and the largest
sprocket.
Use a 2 mm Allen key to turn the low adjustment bolt
to adjust so that there is a clearance of 0.5 - 1 mm
between the chain and the chain guide inner plate.
Largest sprocket
Guide pulley
Low adjustment bolt
9
Adjustment
Smallest sprocket
B-tension
adjustment bolt
Support bolt
Top adjustment bolt
0.5 – 1 mm