Shimano E6000 Series Kullanıcı Kılavuzu - Sayfa 7

Bisiklet Aksesuarları Shimano E6000 Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Shimano E6000 Series 47 sayfaları. Total electric power system
Ayrıca Shimano E6000 Series için: Kullanıcı Kılavuzu (38 sayfalar)

Sayfayı Yazdır

Features of SHIMANO STEPS

Features

• Lightweight, compact design

• Silent, smooth ride

• High shifting performance system (In the case of electronic gear shifting)

This system uses accurate sensors to enable shifting gears by providing the most appropriate level of power assistance

carefully adjusted by computer controls.

• Full Automatic Shifting (In the case of electronic 8-speed gear shifting)

The sensors detect riding conditions, whether you are riding up a hill against the wind, or on flat ground with no wind;

the automatic gear shifting system uses computer controls to make your ride more pleasant.

• Start mode (In the case of electronic gear shifting)

This function allows automatic shifting down to a preset gear when you stop the bicycle such as at traffic lights so that

you can start traveling at a light gear.

* If, while the bicycle is stopped, you shift to a gear lower than the set gear, the system will not automatically shift up.

• Coaster break compatible (DU-E6010)

Smoothly provides sufficient control power.

• Light off road

Sporty, provides powerful assistance. Can only be used when set by the manufacturer of the completed bicycle.

• Walk assistance function (Walk assist mode)

* Some of the functions listed above can only be used once the firmware has been updated. If this is the case, consult the

place of purchase, and carry out the firmware updates.

Riding the bicycle

Turn on the power.

• Power cannot be turned on while charging.

Select your preferred assist mode.

Assistance will start when the pedals start turning.

Change the assist mode in accordance with the riding conditions.

Turn the power off when parking the bicycle.