Shimano E6000 Series Kullanıcı Kılavuzu - Sayfa 22
Bisiklet Aksesuarları Shimano E6000 Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Shimano E6000 Series 38 sayfaları. Total electric power system
Ayrıca Shimano E6000 Series için: Kullanıcı Kılavuzu (47 sayfalar)
Sayfayı Yazdır
Turning the battery-powered light ON or OFF
When the battery-powered light is connected,
pressing the Assist-X for 2 seconds displays this
information instead of the clock and assist mode. The
light turns on and off each time it is displayed. It is
displayed for about 2 seconds.
The light turns on and off in conjunction with the battery
power.
When the battery power is off, the light is off.
Clearing the traveling distance
When the light is not connected, you can clear the traveling distance in the main screen. If the battery-powered light is
connected and configured, clear the traveling distance (DST) according to "Clear settings (Clear)" in "Changing the
settings".
1.
Change the traveling data display to DST and press
the Assist-X for 2 seconds.
2.
Release the finger when the DST indication starts
blinking.
In this state, pressing the Assist-X again clears the
traveling distance.
• The DST indicator light stops blinking and the screen
takes you back to the basic screen after leaving it alone
for 5 seconds.
• When the traveling distance is cleared, TIME, AVG, and
MAX are also cleared.
Assist
2 Sec.
When the light is
turned on
Assist
2 Sec.
20
Shift
When the light is
turned off
Shift