Shimano ST-6510 Servis Talimatları Kılavuzu - Sayfa 8
Bisiklet Aksesuarları Shimano ST-6510 için çevrimiçi göz atın veya pdf Servis Talimatları Kılavuzu indirin. Shimano ST-6510 10 sayfaları. Ultegra series shifter
Sayfayı Yazdır
3.
Disassemble as shown.
Do not disassemble any futher as reassembly may
not be possible.
• Be sure to regrease.
Assembling the bracket
and lever
1.
Put the cable hook in to the bearing member, and
set the return spring.
Set the end of the spring in
the hole in the bearing
Cable hook
member. Note that the
spring has a right and left
side.
Bearing
Return spring
member
2.
Set the special installation tool for the return spring.
3.
First insert the sensor cable into the bracket body,
and then assemble the bracket body and lever body.
Be careful that the end of the return spring does not
protrude from the hole in the bearing member at
this time.
Lever
Make sure the spring is properly positioned.
Grease
Hole
Return spring installation tool
(TL-ST02)
Bracket