Shimano Calais 200DC Kullanım Kılavuzu - Sayfa 14

Balıkçılık Ekipmanları Shimano Calais 200DC için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Shimano Calais 200DC 48 sayfaları. Shimano fishing equipment user manual

Sayfayı Yazdır

4 X 8 DIGITAL CONTROL BRAKING SYSTEM

The next step in the evolution of Digital Control:

The 4 X 8 Digital Control Braking System

In the sport of fishing, Shimano has studied how reels cast for

many years. This resulted in innovations such as Easy Mag,

VBS, and most recently, the award winning Digital Control

(DC).

The Digital Control Braking System allows the electromagnetic

brake to be applied in intervals of up to 1/1000 of a second by

programming the brake curve on the DC Circuit Board inside of

the reel.

But there was still something to be improved. The original DC

used one pre-programmed braking curve and allowed for 8

settings along the curve to increase or decrease the amount of

braking force. This curve was an excellent, all-around curve,

that was ideal for most bass fishing or inshore applications.

However, the DC was not ideal for slow spool speeds, such as

Skipping or Pitching. Also, because of the pre-programmed

curve, competition casters or surf casters were limited, even by

the lightest settings.

On the other hand, many people have turned to spinning reels

under extremely windy conditions, because baitcasters are

notoriously difficult to control under these situations, even

with the most educated thumb. Could DC be the answer for

this?

For the new 4 X 8 Digital Control Braking System, Shimano

thoroughly analyzed casting mechanisms for various

environmental and mechanical conditions.

This resulted in dividing various conditions into 4 modes:

• Extreme Distance Mode

this curve provides over 50,000 RPM and is designed for very

specific applications

• Long Distance Mode

all-around profile for most fishing applications

• Accuracy Mode

excellent for skipping or pitching

• Wind Mode

allows for long casts into a head wind

In "4 X 8" the "4" refers to these modes, where the "8" refers to

8 different brake strength settings per profile. (Total of 32

brake settings from the 4 X 8 DC Braking System)

On the following pages, the ideal uses, descriptions and

explanations of each of the 4 Modes will be explained.

*Brake force needed is different by line diameter and line

weight