Shimano DENDOUMARU 4000HP Kullanım Kılavuzu - Sayfa 27
Balıkçılık Ekipmanları Shimano DENDOUMARU 4000HP için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Shimano DENDOUMARU 4000HP 32 sayfaları.
Sayfayı Yazdır
3
How to maintain
•
To prevent rust on the connector, cover it up when not in use
with the cap for water prevention.
•
Dirt and sand that stick to the component should be removed,
then dry it. And do not immerse in water.
Do not use volatile solution such as thinner, benzene, etc.
•
Do not dismantle the reel. Inside there are motor, breaker, and
other electrical components. It may cause damage.
•
Do not apply oil to the drag area. Otherwise the drag capability
may drop.
•
If you keep for long at a place with high temperature and high
humidity, the shape may change and the strength deteriorate.
For long period storage, after the above maintenance has been
done, keep it in a location with good ventilation.
4
Safety features
•
Self-recovering breaker
When the motor is overloaded, to protect
the motor, the breaker will work.
When the breaker works, and when it
recovers, there will be alarm sound an-
nouncement. When the breaker works, all
indicators will blink as shown on the right.
•
When doing your own dismantling or repair, do not get your fingers cut
by the sharp edge of component.
•
The reel unit, especially the counter, should
not be immersed in water. (The counter is
water-proof under normal specification, but
to avoid trouble, do not immerse in water).
•
The reel you have now is meant for long life
service, and a special grease has been
made for that purpose. Apply it through the
two holes of power cord terminal as shown in the drawing.
•
Battery detection indicator
When battery voltage drops (approx.10.5V), cord
and connector contact will be affected, and the
battery icon will blink. (Drawing A).
And, when the volatge is above DC 21V, "Err" will
appear. (Drawing B).
Screw
Apply grease through
these 2 holes
(Fif. A)
(Fif. B)
27