Shimano STEPS E6000 Kullanıcı Kılavuzu - Sayfa 44
Bisiklet Shimano STEPS E6000 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Shimano STEPS E6000 46 sayfaları. Shimano steps e6000 battery and charger
Sayfayı Yazdır
7.
Fault
7.1
Battery
Display
Description
5 LEDs flash quickly
after the battery button is
pressed.
The first LED flashes rapidly
after pressing the battery
button.
No LEDs light up after
pressing the battery button.
The range appears too short
EN-44
Original User Guide | Pedelec Shimano Steps E6000 Version 1
Cause
a) Battery is flat and is disabled.
b) The battery is overloaded.
c) The battery is too cold or too hot.
There is a charging fault.
The battery is faulty.
a) The range depends on:
»
Ride profile
»
Assist mode
»
Tyre pressure
»
Riding style
»
Physical condition
»
Overall weight
»
Outside temperatures
»
Battery capacity
»
The route selected
»
Smartphone charging via display
b) A learning cycle has not been carried out.
Remedy
a) If the battery is flat, it will work again briefly after a short recovery period, then switch off
again. It must now be charged
6.3.1 Charging a battery Page
b) If the battery is overloaded, it switches itself on again after a short rest period and can be used
again as normal.
c) The permissible ambient temperature during operation is between 0 and +40°C.
Unplug the charger from the mains immediately. If the problem reoccurs, a new battery
charger is required.
Please contact your cycle dealer. The battery must be replaced.
a) The are many reasons why the range may seem low
Perform a 'learning cycle': A new, fully charged battery should be run down once until the
motor assist stops and without recharging in between. In that way the battery 'learns' its
capacity, and the actual capacity will agree with the level indicated on the battery status
display. As soon as the battery enters Sleep mode, press the battery button for one second.
Then the learn cycle can be continued. Please perform a learn cycle every six months or
5,000 kilometres. If you do not repeat this from time to time, the actual capacity of the
battery will increasingly diverge from the value on the battery status display.
EN-41.
5.4.1 Range Page
EN-37.