Shimano Ultegra 6770 Series Kılavuzlar - Sayfa 12

Bisiklet Shimano Ultegra 6770 Series için çevrimiçi göz atın veya pdf Kılavuzlar indirin. Shimano Ultegra 6770 Series 24 sayfaları.

GEAR SHIFTING OPERATION

$ Dual control lever (ST-6770)

Operating the rear shifting switches (initial settings)

The chain moves from a smaller sprocket to a larger sprocket

each time the switch is operated.

Shifting switch (X)

Operating the front shifting switches (initial settings)

The chain moves from the smaller chainring to the larger

chainring.

Shifting switch (X)

• If the chain falls off on the inside, keep pressing shifting switch (X) for 1 second or more to move the front derailleur to

the outermost position, and then keep it pressed for 10 seconds in order to reset the chain.

• There is a function using the SM-PCE1 for changing between shift up and shift down operations for shifting switches (X)

and (Y) and the rear shifting switch and front shifting switch.

* For details on changing the shifting switches, refer to the help screens for E-tube Project (PC application).

The chain moves from a larger sprocket to a smaller sprocket

each time the switch is operated.

Shifting switch (Y)

The chain moves from the larger chainring to the smaller

chainring.

Shifting switch (Y)

$ Names and example locations of each part

Built-in type (SM-JC41)

SM-JC41

External type (SM-JC40)

SM-JC40

SM-EW67-A-E

EW-SD50-I

SM-EW67-A-E

EW-SD50