Shimano DI2 Adapter B Kullanıcı Kılavuzu - Sayfa 2

Akü Şarj Cihazı Shimano DI2 Adapter B için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Shimano DI2 Adapter B 2 sayfaları. Rear derailleur
Ayrıca Shimano DI2 Adapter B için: Bayi El Kitabı (19 sayfalar)

Shimano DI2 Adapter B Kullanıcı Kılavuzu
About the RD protection function
* Rotate the front chainwheel while restoring operation after the RD protection
function has activated.
In order to protect the system when the bicycle falls and is subjected to a strong
impact, the RD protection function will activate and momentarily sever the
connection between the motor and the link, impairing the proper function of the
rear derailleur. If this happens, press and hold the mode button on the system
information display or the button on junction [A] for 5 seconds or more. This will
restore the connection between the motor and the link, and clear the RD protection
function for the rear derailleur. When recovery cannot be performed via button
operations, it may be possible by hand. Check with the place of purchase in
advance.
Button
(press for 5
seconds or more)
Junction [A]
LED window for
button
Button (push)
Press and
Red
Flashing red
hold button
Requires
approximately 5
seconds
When the red LED of junction [A] is lit, the rear derailleur will not shift. Press the
button until the red LED turns off.
System information
display
Red
RD protection
reset
Complete
One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003
High Tech Campus 92, 5656 AG Eindhoven, The Netherlands Phone: +31-402-612222
Roebuck Way, Knowlhill, Milton Keynes, Buckinghamshire, MK5 8HL, United Kingdom
3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan
Please note: specifications are subject to change for improvement without notice. (English)
© Feb. 2021 by SHIMANO INC. ITP