Crestron 4K DigitalMedia 3-Series Hızlı Başlangıç Kılavuzu - Sayfa 5

Kontrol Sistemleri Crestron 4K DigitalMedia 3-Series için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Crestron 4K DigitalMedia 3-Series 8 sayfaları. Media presentation controller
Ayrıca Crestron 4K DigitalMedia 3-Series için: Ek Kılavuz (20 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Kılavuzdan (2 sayfalar), Hızlı Başlangıç Kılavuzu (7 sayfalar), Hızlı Başlangıç (2 sayfalar), Kılavuzdan (2 sayfalar), Kılavuzdan (2 sayfalar)

DMPS3-200-C, DMPS3-300-C, & DMPS3-300-C-AEC

3-Series® DigitalMedia™ Presentation Systems

CAUTION:

To reduce the risk of fire, us only 26 AWG or larger

telecommunication line cord for connection to the PHONE connector

on the DMPS3-300-C-AEC.

Electrical Connection:

"This product must be connected to an earthed mains socket-outlet."

Finland: "Laite on liitettävä suojamaadoituskoskettimilla varustettuun

pistorasiaan."

Norway: "Apparatet må tilkoples jordet stikkontakt."

Sweden: "Apparaten skall anslutas till jordat uttag."

The DM INPUT and DM OUTPUT ports are PoDM power sourcing

equipment (PSE) ports and are HDBaseT PoE compatible. Enabling PoDM

and HDBaseT PoE power sourcing requires connection of the PODM

48VDC IN port to an external Crestron power pack (PW-4818DU, sold

separately). Any wiring connected to a PoDM or HDBaseT PoE port is for

intrabuilding use only and should not be connected to a line that runs

outside of the building in which the PSE is located.

Determine the Address

The device can be addressed using the hostname. The default hostname is

DMPS3-xxxxxxxx, where xxxxxxxx is the last eight characters of the MAC

address (excluding punctuation). For example, if the MAC address is

00:10:7F:08:09:AA:05, the default hostname is DMPS3-0809AA05. The

MAC address is labeled on the shipping box and rear panel of the device.

Alternatively, the device can be addressed using the IP address. By default,

DHCP is enabled. To set a static IP address, use any of the following:

Crestron Toolbox™ software on a PC that is connect to the device via

Ethernet

NOTE:

The Device Discovery Tool can be used to find the current IP

address.

USB connection to the COMPUTER port on the front panel of the

device

Front panel LCD display menu

Quick Start