Accutone WT99 Manuel - Sayfa 9

Kulaklıklar Accutone WT99 için çevrimiçi göz atın veya pdf Manuel indirin. Accutone WT99 10 sayfaları. Dect headset system for telephones with handset lifter

Sayfayı Yazdır

WT99 WIRELESS TELEPHONE HEADSET

your true wireless handsfree office solution!

Product in Action

K. Volume Adjustments

To mute the microphone of the

headset, simply press the

Microphone Mute Button on the

headset.

The LED on the base station will

flash rapidly AND a Beep tone will

be heard in the headset indicating

the microphone is muted.

To unmute, simple press the

Microphone Mute Button again.

Note that the Mute function can only be activated during talking mode.

To adjust the speaking/microphone

volume of the headset, press the

(10)

Microphone Volume Buttons

on the base station.

To adjust the listening/speaker

volume of the headset, you can

either press the

(12)

Volume Buttons of the base station

or the

(13)

Listening Volume Knob

on the top of the headset.

Note that the headset must be in

talking mode to adjust volumes.

(5)

L. Frequently Asked Questions

"The base station does not work!"

Check that the AC adaptor jack is connected to the proper jack on the back

of the base unit as well as a working power wall-socket.

Make sure you are using the supplied AC adaptor.

Listening

Check if third LED bar of the

connecting the device to a power socket. If not, the setup is improper, try

again or contact your local distributor for support.

"My headset does not work!"

Check that the telephone is connected to the base unit's

Jack, and that it's firmly connected.

Headset may be out of operational range, move closer to the base station

during initial setup, as interference and reception range varies across

different office environments.

Make sure that the headset battery has been charged fully, place headset

inside the base station's cradle to charge. If the LED indicator

headset or the base station

maybe dead, contact your local distributor for battery replacement.

The listening volume on the headset may be too low. Rock the

Listening Volume Knob on the headset up.

The headset may have been un-registered from the base station, try re-

registering it following the instructions in Section D of this user manual.

[ inspiring people, inspiring change ]

Troubleshooting

(9)

Battery Indicator has flashed once when

(17)

(7)

fails to indicate battery charging, the battery

Telephone

(8)

on the

(13)