Digital Blue SNAP 1.3MP Hızlı Başlangıç Kılavuzu - Sayfa 2

Dijital Kamera Digital Blue SNAP 1.3MP için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Digital Blue SNAP 1.3MP 2 sayfaları. Digital blue snap 1.3mp: quick start

Sayfayı Yazdır
This icon shows when your camera's memory is full.
Flash -
Indicates when the Flash is on, set on auto, or off.
On=
Off=
Auto=
Counter –
Shows the estimated number of images you are still able to take.
Camera Modes
Your camera has 2 modes, Capture and Playback.
Capture Mode –
The camera will be in Capture Mode when it is turned on.
Capture Mode is used to view your subject when taking pictures.
Playback Mode –
This mode can be used to review or delete pictures in
your camera's memory by pressing the Playback button.

Camera Memory

Your new camera stores pictures on its on-board memory. The camera
comes with 32 MB (approximately 150 photos) of on-board memory.
To Take Pictures with Your Camera:
1.
Use the Display Screen to locate the subject of your picture and hold the
camera steady.
2.
Press the Capture Button located on the top of the camera to take the
picture. The camera will beep.
Note:
The counter on the display will decrease by one each time you take a
picture until the memory is full.
FCC DECLARATION:
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device
must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user's authority to operate the equipment.
TM and © 2008 Digital Blue, Inc. All rights reserved.
A
Reviewing pictures on the camera
Press the Playback button to enter the Playback Mode.
Note:
Your camera will automatically return to Preview Mode after three
seconds when you finish using the Navigation buttons to review your
pictures.
Deleting Pictures From the Camera
1.
Press the Playback button to enter Playback Mode.
2.
Scroll through using the arrows to find your picture.
3.
Once you get to the image you want to delete, press the Trashcan button.
4.
Use the up and down buttons to select yes or no.
5.
Press the OK button to confirm your selection.
To delete all the pictures on your camera:
1.
Press the Playback button to enter Playback Mode.
2.
Press and hold the Trashcan button for three seconds.
3.
When you see
on the screen, press the OK button to confirm you
wish to delete all the images.
Note:
If you don't press a button within 5 seconds after hitting the Delete
button, the camera will return to preview mode.
Need Additional Help?
For additional product support visit our website at
Customer Service. If you are still having problems with the product,
contact customer support at 888-800-0502.
To launch the Help File: Start > All Programs > Snap! Help
www.digiblue.com
and select