Accutone T3 Kullanım Kılavuzu & Kurulum Kılavuzu - Sayfa 4

Telefon Accutone T3 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu & Kurulum Kılavuzu indirin. Accutone T3 6 sayfaları. Professional headset telephone

Sayfayı Yazdır

(B) Connect to Wall Jack

Use the RJ-11 Modular Patch Cable provided to connect the T3 headset

telephone to any standard Telephone Wall Jack via the (13) Line-In Jack

as illustrated.

connect to wall jack.

T3 is designed to pair with any series of Accutone Telephone Headset,

TM363VT is shown above. Make sure the (QD) Quick Disconnectors

are firmly connected as shown. Then, connect the RJ-9 Modular Jack of

the headset to the (7) Telephone Headset Jack of the T3 Telephone.

*QD connector may differ depending on headset models.

Device Setup

(D) Testing Connection

Test your T3 Telephone's setup by making a phone call to someone. Put

on your headset and make sure it's connected properly as illustrated in

the previous section. Please make sure you wait 10 seconds after you

plug in your telephone before making your first call.

(E) Initial Troubleshooting

If you do not see the online LED-indicator lighting up after you press the

answer key, make sure the other end of the modular cable has been

connected to a wall jack. Make sure the telephone network is direct

PSTN or ask your system solution provider if your PaBx system supports

T3.

If the LED-indicator lights up, but there's not sound coming in or going

out of the headset, make sure you are using a standard Accutone

headset, not an alternative brand, as the settings are different across

brands. Also make sure the QD (quick disconnector) are firmly

connected.

T3 Professional Headset T elephone

Device Testing

Press the (8) Answer/Off-Hook

Key to turn on the device and get

a line.

You should be able to hear a dial-

tone and the (7) Online LED-

Indicator should light up amber.

Make a call to make sure both

incoming and outgoing sounds are

normal.