Digital Combo DK20S Manuel - Sayfa 16
Elektrikli Alet Digital Combo DK20S için çevrimiçi göz atın veya pdf Manuel indirin. Digital Combo DK20S 20 sayfaları. Multi-purpose press
Sayfayı YazdırThe majority of the press has been designed to be as maintenance
free as possible. There are only a few aspects of the machine that
should be monitored to insure proper operation.
•
The clamp/linkage assembly is the greatest area of wear and friction
on the press. The posts that connect to the heat platen should be
lubricated with SuperLube - a clear high-temperature lubricant. Do
not use grease, white lithium, or WD-40 to lubricate the clamp/linkage
assembly.
•
Check the power cord and heat platen connector cords regularly to
make sure there are no visible signs of damage. Make sure the modular
cord does not come in contact with the underside of the heater. The
modular cords should travel from under the head back away from the
machine.
•
The silicone pad on the lower table can degrade after much use and
over an extended period of time. This pad is replaceable. If the pad
becomes dried out, cracked, or there are chunks removed from the
silicone pad, this can result in inconsistent and poor quality transfers.
16